How to Remove Acrylic Paint from Tiles?

Whether you’re trying to remove a few inadvertent splatters or you’ve discovered a treasure trove of vintage tile beauty beneath a previous paint job, it’s perfectly possible to remove paint off the tile However, if your tiles’ glaze has cracks, flaking, or webbing, any attempt at removing the paint will likely compound the damage.

How to Remove It Using Method 1

You can use this procedure to remove paint splatters if you’ve been a touch reckless during a paint job. Move on to Method 2 if the dried-on paint is still obstinate. While scraping lead-based paint for decades, be sure to wear a dust mask — don’t take any chances with lead-based paint.

STEP 1

Continue with confidence if the paint comes off without damaging the glaze. It’s preferable to go on to Method 3 if you feel any cracking or flaking of the glaze or detect any cracking or flaking.

STEP 2

Wipe the tiles clean with a damp rag. You’ll have to scrape and wipe until all the spatter Then if certain splatters don’t come out, you can try

Heat and Scrape Method 2

Paint that has been dried and hardened can be loosened For any paint that is before 1978, wear a dust mask while you work to prevent inhalation of toxic fume

STEP 1

Work on a little area at a time, such as a square foot. You can prevent scorching a surface if you heat up tiles while spinning the gun, and keep doing so until the paint feels soft and tacky, around

STEP 2

With a 45-degree angle scraper, remove paint from tile starting at the outer edge and working in.

STEP 3

Use a clean rag wet with water to clean the surface on a regular basis. You’ll have to keep doing this until all of the paint has been removed.

THE THIRD METHOD:

For tiles older than 20 years, ask your retailer for a paint remover for glazed surfaces with a conservation rating. Whatever paint remover you decide to use, make sure that the area where you are working is well aired by opening windows

STEP 1

Use a home cleanser or a 50/50 mix of white vinegar and water to clean painted tiles. Then wipe the surface with a moist towel to neutralise it. Be sure to put on your goggles and gloves before you

STEP 2

Test the tile’s capacity to handle the paint remover in an inconspicuous location. Using a clean rag, liberally apply paint remover as indicated on the label.

STEP 3

Remove the paint using a plastic scraper held at a 45-degree angle. Use a remover after scraping. Providing the glaze has not been damaged, the rest of the tile can be finished as well. The tiles will need to be refinished if the glaze is damaged.